Aug . 01, 2024 18:07 Back to list

E waste shredder overview

The e waste shredder is a machine composed of a crushing knife roller system, a load-bearing chassis, a feeding system, a power system, and an electronic pressing system. It is mainly used to crush coarse and hard garbage, reduce its volume, save space, and facilitate transportation and recycling. , such as waste tires, building materials, waste furniture, electronic waste, etc.

Features of Used Electronic Waste Shredder

1. It has the advantages of large torque, high output, no noise, and wear resistance.
2. It can greatly reduce the volume occupied by chips, and chips can be fed continuously or intermittently.
3. The horizontal double-roller chip shredder can make the drying, briquetting, smelting, crushing, pre-processing and transportation of chemical fireproof materials simple and easy.
4. It has the advantages of large crushing ratio, high production efficiency, and small discharge particle size.
5. The machine driving device is equipped with safety electrical protection, which can effectively prevent equipment damage caused by unexpected failures.
6. Chips can be fed continuously or intermittently.
7. The use of horizontal chip shredder facilitates the subsequent processing of chips, effectively reduces the volume of chips and saves storage space.

Working Principle of Waste Electronic Product Shredder Machine

The material falls vertically from the upper part of the machine into the high-speed rotating impeller. Under the action of high-speed centrifugal force, it collides and crushes at high speed with another part of the material that is shunted around the impeller in the form of an umbrella. After the materials collide with each other, they will be crushed between the impeller and the impeller. The materials form eddy currents between the casings and are crushed by multiple collisions and frictions. They are discharged straight from the bottom, forming a closed circuit for multiple cycles, and are controlled by the screening equipment to achieve the required granularity of the finished product.

Tips of Electronics Shredder

Electronic waste shredders mainly use mechanical crushing and physical sorting methods to efficiently process waste electronic products. The equipment first crushes the electronic waste through the shredder, and initially crushes the metal, plastic and other materials in it. Then, various materials are further effectively separated through physical methods such as magnetic separation and air separation.
The electronics shredder has a large crushing ratio, and the maximum crushing ratio can reach the discharge granularity, which can be adjusted arbitrarily and is not affected by the wear of the plate hammer and lining plate; there is no screen bar setting; the waste e-waste shredder adopts an elastic adjustment mechanism, making it unbreakable The waste can be automatically discharged without causing damage to the equipment; the bearings are arranged horizontally and have a long service life; the bottom body of the waste motor rotor shredder has a unique structure, and there is almost no wear on the bottom body during crushing; the rear cavity is equipped with a screw rod or a hydraulic opening mechanism, which does not require The wearing parts can be easily replaced by opening the main device.

Choose the Reliable Shredder Machine Manufacturer

As a kind of crushing machinery with wide range of uses and huge potential, the electronic waste shredder has relatively high quality requirements. Only by choosing a trustworthy manufacturer can you buy the right product.Onwang Technology has focused on producing municipal solid waste sorting lines, copper wire granulators, metal shredding equipment, eddy current separators for many years, Accumulated rich industry experience and won excellent reputation that will be your reliable machine supplier. You can contact us in any time to know more.

Innovative Small Eddy Current Separator for Efficient Separation of Non-Ferrous Metals in Recycling Processes