Nov . 11, 2026 00:44 Back to list

How to Choose a Hammer Mill Shredder for Scrap Metal


Choose a hammer mill shredder by the scrap entering your line, the largest prepared piece, required hourly flow and available electrical capacity. The HM80 to HM250 range covers listed capacities from 1 to 30 t/h, with feeding openings from 80 to 3,000 mm and main power from 75 to 600 kW. Use these figures to narrow the model before requesting a quotation.

How to Choose a Hammer Mill Shredder for Scrap Metal
Illustration for reference; see the product page for actual photos and specifications.
01

Incoming scrap type and preparation limits, including excluded components in car bodies, white goods and cans

02

Required feed opening, main power and throughput range for the planned material flow

03

PLC control and protection requirements for mixed scrap, including foreign-object detection and automatic cutout

04

Downstream requirements for impurity removal, output density, transport and smelting

Start with the incoming scrap

A hammer mill shredder suits scrap-metal operations that need to break down bulky metal and prepare denser material for handling or smelting. We supply the range for car bodies, wheel hubs, aluminum can bales, aluminum door and window offal, non-ferrous scraps, tin cans, motors or rotors, household appliances, bikes and similar materials.

Preparation determines whether each stream is ready for feeding. Whole or flattened car bodies should arrive without tires, fuel or gas tanks, engines and gearboxes. White goods should be free of motors, compressors and axles. Empty cans should contain no liquid or paint. Build these checks into receiving and sorting before you compare machine sizes.

For a mixed scrap yard, define three things first: what enters the feed opening, the largest prepared piece, and the hourly quantity the line must handle. That information separates a small-flow machine from a high-capacity configuration and also shows where your sorting point belongs.

Match the model to flow and opening

The range covers five model configurations. Use the listed figures as the first screen for capacity, feed size and power:

  • HM80: 80 mm feeding opening, 75 kW main power and 1 to 3 t/h capacity.
  • HM100: 1,000 mm feeding opening, 90+90 kW main power and 3 to 5 t/h capacity.
  • HM160: 1,600 mm feeding opening, 132/200 kW main power and 5 to 10 t/h capacity.
  • HM200: 2,500 mm feeding opening, 400 kW main power and 15 to 20 t/h capacity.
  • HM250: 2,500 to 3,000 mm feeding opening, 600 kW main power and 20 to 30 t/h capacity.

HM80 fits a planned flow of 1 to 3 t/h when the prepared pieces suit its 80 mm opening. HM100 is the starting point for 3 to 5 t/h and a 1,000 mm opening. HM160 covers 5 to 10 t/h. HM200 and HM250 suit plants planning 15 to 30 t/h, with the HM250 range extending the opening to as much as 3,000 mm.

Do not choose by capacity alone. A line receiving flattened car bodies, aluminum scrap and white goods may need different preparation before the material reaches the shredder. Send the material types, largest incoming piece and expected hourly quantity so we can align the model and feed arrangement.

Plan protection around mixed material

Our shredder uses a PLC control cabinet with overload, short-circuit and phase-break protection. Slow-speed cutters increase resistance to foreign objects, and the machine automatically cuts out when foreign material is detected. These functions suit mixed scrap operations that need a defined sorting stage before feeding.

A practical layout places the sorting point before the selected opening. A facility processing car bodies can remove tires, tanks, engines and gearboxes before the bodies reach the feed area. A line handling white goods can separate motors, compressors and axles in the receiving zone. The machine's protection functions support this workflow, but they do not replace material preparation.

The equipment uses thick, heavy-duty knives and hard-wearing shredder components. We also use noise-reduction technology and dust and paint removal features in the processing system. If your line handles painted scrap, cans or mixed metal, plan the route from the shredder to the next collection or separation stage.

Connect the shredder to the next process

The machine breaks down and compresses scrap metal, removes dust, paint and other impurities, and raises the density of the shredded material. Denser output occupies less space during transport and provides a more compact furnace charge for smelting operations.

For aluminum door and window offal, picture the material moving from the receiving area into the selected opening, then into storage or the next process after shredding. Check the conveyor, collection and storage route against the expected output flow. For car-body scrap, measure the path from preparation to feeding and compare the prepared pieces with the selected opening.

The range suits scrap recycling facilities, metal processing plants and smelting operations. Select HM80 through HM160 for the listed 1 to 10 t/h flows. Consider HM200 or HM250 when the planned flow reaches 15 to 30 t/h and the site can support the corresponding power demand.

Specification questions to settle

What does the 90+90 kW figure mean for HM100 selection?

HM100 is listed with 90+90 kW main power and a 3 to 5 t/h capacity. Treat the paired power figure as part of the configuration you need us to review, not as a single 90 kW value when planning the electrical supply. Include the site power information with your target flow so we can assess this model correctly.

Which model covers a 10 to 15 t/h transition?

The listed configurations jump from HM160 at 5 to 10 t/h to HM200 at 15 to 20 t/h. If your planned flow sits between those ranges, do not assign it automatically to either model. Send the material mix, largest prepared piece and target flow for a configuration review before fixing the machine size.

When does the HM250 opening range matter?

HM250 is listed with a 2,500 to 3,000 mm feeding opening, 600 kW main power and 20 to 30 t/h capacity. The larger opening matters when the prepared feed requires more than 2,500 mm of entry width. Include the largest piece and the desired capacity in your inquiry so we can match the opening within this range.

Prepare the quotation information

Choose HM80 through HM160 for the listed 1 to 10 t/h flows, and consider HM200 or HM250 for 15 to 30 t/h requirements. We can assess the fit from your scrap types, preparation method, largest feed piece, target capacity, available electrical power and downstream output route. Send those details, the required quantity and site layout constraints when requesting a quotation.

The company

OnWang Technology Hebei Co.,Ltd.

Onwang Technology Hebei Co.,Ltd, orienting at research, development, manufacture and sales, is a professional and productive entity enterprise, specialized in manufacturing solid waste and garbage recovery processing equipment. It locates in Dafu Village,Qingyuan district, covering a total area of thirty thousand square meters. Our company mainly produce municipal solid waste sorting line, copper wire granulator, scrap metal shredding equipment, eddy current separator, cleaning and drying equipment.…

About Us ↗Visit company website ↗
Share


tel
email
goTop

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.